figures 3

Chapter 2: Glove Implementation
Fig 2.34 choosing location on the computer
Fig 2.35 test ZigBee
Fig 2.36 ZigBee Serial number
Fig 2.37 modem configuration tab to start configure ZigBee
Fig 2.38 choosing Read button to read the firmware
Fig 2.39 function set of the ZigBee
Fig 2.40 determine PAN ID
Fig 2.41 determine the destination of ZigBee
Fig 2.42 write parameters to XBee module
Fig 2.43 configuration of the receiver
Fig 2.44 sending and receiving between two ZigBee
Fig 2.45 MPU6050 Module
Fig 2.46 MPU6050 block diagram structure
Fig 2.47 MPU-6050 pins
Fig 2.48 connection between MPU-6050 and Arduino
Fig 2.49 row values of accelerometer
Fig 2.50 glove to be used
Fig 2.51 fixing the sensor on the glove by thread
Fig 2.52 flex sensors on the glove
Fig 2.53 MPU-6050 module chip up and down view