The Test / Query button is used to test the selected COM port and
PC settings. If the settings and COM port are correct, there will be a response similar to the one depicted in Figure 2.26 below
Fig 2.26 test/query button response
Host Setup:
The Host Setup tab allows us to configure how the X-CTU program is to
interface with a radio’s firmware. This includes determining whether API or
AT command mode will be used to access the module’s firmware as well as
the proper command mode character and sequence.
User COM ports:
The user COM port option allows the user to “Add” or “Delete” a usercreated
COM port. This is only for temporary use. Once the program has
closed, the user-created COM port will disappear and is no longer
accessible to the program.
The Host Setup tab allows us to configure how the X-CTU program is to
interface with a radio’s firmware. This includes determining whether API or
AT command mode will be used to access the module’s firmware as well as
the proper command mode character and sequence.
User COM ports:
The user COM port option allows the user to “Add” or “Delete” a usercreated
COM port. This is only for temporary use. Once the program has
closed, the user-created COM port will disappear and is no longer
accessible to the program.
No comments:
Post a Comment